A balancing instrument suitable for crushers, fans, mulchers, augers on combines, shafts, centrifuges, turbines, and va
Posted: Tue May 20, 2025 10:23 pm
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Essential Features and Capabilities
Vibration Measurement Mode
Tachometer: Accurate RPM measurement.
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Represents imbalance on a polar chart for precise correction weight placement.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Determines acceptable imbalance in accordance with ISO 1940.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Shows vibration characteristics at the primary frequency.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Presents the frequency spectrum for detailed examination.
Supplementary Functions
Archive: Store and access previous balancing sessions.
Reports: Generate detailed balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Included with the Device
Balanset-1A is supplied with:
A measurement block with USB interface.
Two vibration measurement sensors.
Optical laser tachometer with magnetic mount.
Electronic scales.
Software (laptop can be ordered separately).
Transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Description of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Essential Features and Capabilities
Vibration Measurement Mode
Tachometer: Accurate RPM measurement.
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Keeps a record of data for further analysis.
Balance Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Represents imbalance on a polar chart for precise correction weight placement.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Determines acceptable imbalance in accordance with ISO 1940.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Graphs
Overall Graphs: Visualizes overall vibration levels.
1x Graphs: Shows vibration characteristics at the primary frequency.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Presents the frequency spectrum for detailed examination.
Supplementary Functions
Archive: Store and access previous balancing sessions.
Reports: Generate detailed balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Included with the Device
Balanset-1A is supplied with:
A measurement block with USB interface.
Two vibration measurement sensors.
Optical laser tachometer with magnetic mount.
Electronic scales.
Software (laptop can be ordered separately).
Transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100